Why use MPP pipes for municipal line renovation？

MPP power pipes are divided into excavation type and non excavation type. MPP power pipes use modified polypropylene as the main raw material and do not require extensive dredging, excavation, and surface treatment. Power protection pipes are laid in special areas such as roads, iron, buildings, and riverbeds for construction projects such as pipelines and cables. Compared with the traditional method of "digging trenches and burying pipes", non excavation power pipe engineering is more suitable for current environmental protection requirements, avoiding factors such as dust flying and traffic congestion caused by traditional construction. This technology can also play a very important role in areas where excavation operations cannot be carried out, such as historic sites, downtown areas, agricultural and farmland areas, highways, rivers, etc.

MPP power pipes have excellent electrical insulation and high thermal deformation temperature and low-temperature impact performance. MPP power pipes buried underground will not cause corrosion of the pipe material. MPP power pipes have higher tensile and compressive properties than HDPE. MPP power pipes are lightweight, smooth, have small main force, and can be welded by hot melt welding. MPP power pipes have a long-term usage temperature of 5-70 ℃, and generally have a long service life under normal temperature and pressure. At the same time, they have good temperature resistance, avoiding softening caused by the heat generated by cable operation.

MPP material, also known as? Modified polypropylene material (MPP material) is mainly used to produce MPP power cable pipes. Modified polypropylene pipes (MPP pipes, MPP power pipes) have the characteristics of high temperature resistance and external pressure resistance, and are suitable for cable conduit pipes of high-voltage transmission lines above 10KV. MPP power cable conduit has good electrical insulation properties; Has high thermal deformation temperature and low-temperature impact performance; MPP pipes have higher tensile and compressive properties than HDPE pipes; In addition, MPP pipes are lightweight, smooth, have low friction force, and can be welded by hot melt welding; MPP pipes have excellent physical properties such as corrosion resistance and long service life.

MPP Power Tube Price Details

Product Name: MPP Power Pipe, commonly known as MPP Cable Pipe or MPP Power Cable Protection Pipe.

Product color: Orange red

Material: PP powder as the main masterbatch.

Product length: usually 6 meters per piece, can be made into 6-13 meters per piece.

Product types: ordinary type and reinforced type, reinforced type is further divided into excavated pipe and non excavated pipe.

Connection method: Use a welding machine to perform hot welding and butt joint. The fusion point should be around 200 degrees Celsius and not exceed 220 degrees Celsius. When the temperature reaches the desired level, the two ends can be joined together. (Due to the connection method of MPP pipes being hot melt welding, poor welding joints may damage the cable or possibly flatten it, so MPP power pipes must be made of brand new materials)